Cablevey

Cable & Button -The CABLE is the heart of the CABLEVEY systems. As the cable is pulled through the circuit, it carries conveyed material with it.

The cable is an aircraft quality steel cable with specially designed plastic discs spaced at regular intervals. The discs are sized to transfer the highest quantity of material with the least amount of friction.

This design serves to gently handle materials from an inlet to discharge by holding materials between the discs within an enclosed tube. Materials are not blown about or forced around sweeps. They’re carried without bumping, battering, stress or friction. Breakage is thereby kept to a minimum. For fragile materials, safe handling means the difference between profitability and loss.

Two sizes available: 1 1/2″ (38mm) and 2″ (50mm)

 

1.5" & 2" Cable & Button

Cablevey cable conveyors are designed to operate on multiple planes such as feeding silos or moving materials from floor to mezzanine. 

  • Gentle material handling and low breakage
  • Maintaining proportional blends
  • Enclosed dust-free environment
  • Easy maintenance

The Capacity of a Cablevey System varies with the speed of the cable and the density being transported.

With certain materials, it may be necessary to use a lower cable speed to reduce carryover of material past the intended drop. The cable speed is altered by changing ratio of the belt drive on the drive unit.

The capacity will also vary with type and moisture content of materials being transported.

1.5" & 2" Cable & Button

Cablevey cable conveyors are designed to operate on multiple planes such as feeding silos or moving materials from floor to mezzanine. 

  • Gentle material handling and low breakage
  • Maintaining proportional blends
  • Enclosed dust-free environment
  • Easy maintenance