Cable Corner Guide


The CORNERS are used to change the directions of cable travel. The corners are specially designed to transfer the conveyed material from one tube to the other and reduce drag on the system.

This is accomplished by means of an idler wheel mounted on bronze bushings. The idler wheel is formed to reduce build-up of material inside the aluminium housing by forcing it to the outside as the idler turns, allowing the cable to carry it away.

The aluminium housing is structured so that it can be waterproofed and so that it will hold tubes rigidly in line with itself.

All corners for the 2” (50) system are also fully weatherproofed.

Cornering Guide

SystemGround MashMaximumPelletsMaximum
1 1/2" (38) System. Rated at 9kg per minuteUp to 275 m8 CornersUp to 275 m4 Corners
Up to 245 m12 CornersUp to 245 m8 Corners
Up to 185 m14 CornersUp to 185 m12 Corners
2" (50) System. Rated at 15kg per minuteUp to 275 m4 CornersUp to 275 m4 Corners
Up to 245 m10 CornersUp to 245 m8 Corners
Up to 150 m12 CornersUp to 150 m10 Corners
Up to 275 m14 CornersUp to 90 m12 Corners